In Stock
The Hikvision DS-K4H255-U 272kg (600lb) Magnetic Lock Bracket is a model-specific U-shaped mounting accessory for the Hikvision DS-K4H255S single-door electromagnetic lock. It is designed for installation on the lower edge of a frameless glass door, providing a suitable mounting surface for the lock system without requiring a conventional wooden or metal door frame.
For buyers searching for the Hikvision DS-K4H255-U price in Bangladesh, the current price at Touch IT is ৳700. Its compact aluminum-alloy body, sandblasted oxidation finish and compatibility with 9–12mm glass make it a practical accessory for office entrances, retail premises and other access control projects using the DS-K4H255S magnetic lock. Confirm the lock model, glass thickness, door design and package contents before ordering.
The DS-K4H255-U is a passive mounting bracket rather than an electromagnetic lock, access controller or authentication device. It helps adapt the DS-K4H255S installation for the lower edge of a compatible frameless glass door. Its purpose-built dimensions reduce the uncertainty associated with using a generic bracket that may not match the lock or glass profile.
Hikvision specifies the DS-K4H255-U as a bracket for the DS-K4H255S single-door magnetic lock. Model-specific compatibility makes product selection clearer for installers and helps create a properly coordinated magnetic lock arrangement.
The U-shaped profile is designed for the lower edge of a frameless glass door. This provides a practical mounting solution where a standard armature installation cannot be fixed directly to a conventional door surface.
The official specification lists compatibility with glass from 9mm to 12mm thick. The installer should measure the actual door glass and inspect its edge condition before installation, because an unsuitable thickness or damaged glass can prevent correct fitting.
The bracket uses high-strength aluminum alloy with a sandblasted oxidation finish. This gives the accessory a durable, professional appearance suitable for modern glass entrances. Browse additional brackets, magnetic locks and installation accessories in the Door Lock category.
At 180 × 24.5 × 38.8mm and 0.2kg, the bracket is compact enough for a neat glass-door installation while providing the model-specific structure required by the compatible lock arrangement.
The bracket contains no wiring, relay, card reader or biometric authentication component. A complete entrance normally requires the compatible magnetic lock, power supply, controller or access terminal and appropriate exit hardware. Explore compatible control devices through the Hikvision Access Control collection.
| Brand | Hikvision |
|---|---|
| Model | DS-K4H255-U |
| Product Type | U-shaped magnetic lock mounting bracket |
| Compatible Lock | Hikvision DS-K4H255S |
| Compatible Lock Class | 272kg (600lb) single-door magnetic lock |
| Dimensions | 180 × 24.5 × 38.8mm |
|---|---|
| Weight | 0.2kg (0.4lb) |
| Material | High-strength aluminum alloy |
| Surface Treatment | Sandblasting oxidation |
| Suitable Door | Lower-edge frameless glass door |
|---|---|
| Supported Glass Thickness | 9–12mm |
| Mounting Position | Lower edge of compatible frameless glass door |
| Electrical Requirement | None; passive mounting accessory |
| Built-in Authentication | None |
Verification note: The 272kg (600lb) figure is the published holding-force class of the compatible DS-K4H255S electromagnetic lock; it is not a separate holding-force specification for the bracket. The magnetic lock, access controller, power supply, exit button and other system components are not assumed to be included. Confirm supplied fasteners, glass-door suitability, installation requirements and warranty terms before purchase.
This bracket is a practical choice when a DS-K4H255S magnetic lock must be fitted to the lower edge of a 9–12mm frameless glass door. Its verified dimensions, lightweight construction and purpose-built compatibility provide a clearer installation path than an unverified universal bracket. For controllers, locks and wider entrance-management products, explore Security System Solutions.
| Model | Product Type | Best Application |
|---|---|---|
| DS-K4H255-U | U-shaped bracket | Lower edge of a 9–12mm frameless glass door |
| Hikvision DS-K4H255-LZ | L/Z bracket set | Mounting the DS-K4H255S lock body and armature plate |
| Hikvision DS-K4H255S | Single-door electromagnetic lock | Provides up to 272kg (600lb) holding force |
The DS-K4H255-U is officially specified for the Hikvision DS-K4H255S single-door electromagnetic lock.
It is designed for installation on the lower edge of a compatible frameless glass door.
Hikvision specifies a supported glass thickness of 9–12mm.
The bracket and magnetic lock are separate products. Confirm the exact package contents before ordering.
No. It is a passive mounting accessory, although the compatible electromagnetic lock requires an appropriate power supply.
No. Authentication is handled by a separate access control terminal, reader or controller.
No. The glass must meet the published thickness range, and the door design and condition should be assessed by a qualified installer.
Touch IT supplies professional door-lock and access-control products in Bangladesh with product consultation, installation planning and after-sales technical assistance. The team can help confirm the magnetic lock model, glass thickness and appropriate bracket before deployment.
Complete your frameless glass-door access control installation with a model-specific U bracket for the DS-K4H255S magnetic lock. Order the Hikvision DS-K4H255-U Magnetic Lock Bracket from Touch IT, visit 312 (3rd Floor), Multiplan Center, 69–71 New Elephant Road, Dhaka-1205, or call 01711664030.
The latest price of Hikvision DS-K4H255-U Magnetic Lock Bracket in Bangladesh is 700৳. You can buy the Hikvision DS-K4H255-U Magnetic Lock Bracket at best price from our website or visit any of our showrooms.
750৳
950৳
