Call for Price
| Hardware | ||
| Display | 7-inch IPS Capacitive Touch Screen | |
| Camera | 2MP Wide-Angle Lens | |
| Resolution | Display: 600 × 1024; Camera: 2MP | |
| Operating System | Linux | |
| User & Storage Capacity | ||
| Face Capacity | 10,000 Faces | |
| Fingerprint Capacity | 10,000 Fingerprints with Fingerprint Module | |
| Card Capacity | 50,000 Cards | |
| Transaction Capacity | 150,000 Events | |
| Authentication & Features | ||
| Verification Modes | Face, Fingerprint with Module, Card | |
| Card Type | M1 Card, DESFire Card, Felica Card | |
| Multi-Factor Authentication | Supported | |
| Face Recognition Speed | < 0.2 Seconds per Person | |
| Face Algorithm | Face Anti-Spoofing, Face Duplicate Check, Single & Multiple People Recognition | |
| Face Recognition Accuracy | ≥ 99% | |
| Face Recognition Distance | 0.3 m to 3 m | |
| Finger Sensor Type | Fingerprint Module Supported | |
| Liveness Detection | Supported | |
| Mask Detection | Supported | |
| Communication & Interface | ||
| Network | TCP/IP, IPv4, IPv6, Wired Network, PoE IEEE802.3at | |
| Interface | 1 × RJ-45 10/100/1000M, 1 × RS-485, 1 × Wiegand, 1 × USB for Module, 1 × 3.5mm Audio Output | |
| Optional Network Protocols | ISAPI, ISUP 5.0, OSDP V2.1.7, SIP Server Support, Custom Wiegand Parameters | |
| Access Control | 1 × Lock Control, 1 × Exit Button, 1 × Door Contact Input, 2 × Alarm Inputs, 1 × Alarm Output, 1 × Tamper | |
| Software & Smart Features | ||
| Software Compatibility | ISAPI, ISUP 5.0, SIP Server Support | |
| SDK | Push SDK Supported | |
| Voice Prompt | Built-in Omnidirectional Microphone, Audio Output Interface | |
| Schedule Bell | Attendance-Only Function, Face Duplicate Check, Multiple People Recognition up to 5 People | |
| Physical Specifications | ||
| Power Supply | 12 VDC to 24 VDC, 2A | |
| Operating Temperature | -30°C to 60°C (-22°F to 140°F) | |
| Operating Humidity | 0% to 90% RH, Non-Condensing | |
| Protection Level | IP65 | |
| Dimensions | 110.5 × 209.2 × 24 mm | |
| Weight | Net: 0.57 kg; Gross: 1.06 kg | |
| Warranty | ||
| Warranty | 1 Year | |
A busy entrance needs quick verification without making everyone use the same credential. The Hikvision DS-K1T673DX-E1 combines face recognition with built-in M1, DESFire and FeliCa card reading on a 7-inch IPS touchscreen. It suits offices, factories and managed buildings planning wired biometric access control in Bangladesh.
Searching for the Hikvision DS-K1T673DX-E1 price in Bangladesh? Call Touch IT for Price and request a quote for your door hardware, power and installation needs. The terminal stores up to 10,000 faces, 50,000 cards and 150,000 events. Fingerprint access is possible with a compatible add-on module; confirm whether that module is included in your quotation.
The DS-K1T673DX-E1 suits sites requiring different credentials for employees, contractors and visitors. The screen guides users, while the card reader provides another entry option. Explore locks and accessories in Touch IT’s access control range when planning the doorway.
Hikvision specifies face recognition in less than 0.2 second per person with at least 99% published accuracy. The 0.3–3m operating distance and recognition of up to five people in one scene can help at busy staff entrances. Actual results depend on enrollment quality, lighting, placement and your access rules.
The reader accepts M1, DESFire and FeliCa cards, with authentication by presenting a card at the screen. This flexibility matters when a workplace already issues more than one badge type. Check card technology and enrollment compatibility before reusing existing credentials; an EM card should not be assumed compatible.
Fingerprint capacity reaches 10,000 templates only with a supported fingerprint module. The terminal’s base configuration should therefore be specified as face and card access unless that module is supplied. Ask which peripheral is compatible, how it mounts and whether your chosen software supports the intended verification workflow.
The 10/100/1000Mbps Ethernet port supports IEEE 802.3at PoE; a separate 12–24V DC, 2A power input is also specified. Plan the switch power budget and cable route with your installer. Hikvision lists ISAPI, ISUP 5.0, RS-485 with OSDP support and Wiegand for compatible integrations. Browse Hikvision access control terminals if built-in Wi-Fi is essential; the published specification for this model lists wired networking.
A lock output, exit-button input, door-contact input, tamper input, two alarm inputs and one alarm output let an installer design a controlled entrance around the terminal. Face anti-spoofing, mask detection and duplicate-face checking provide additional enrollment and verification tools. Configure these functions around your organization’s actual access policy.
An attendance-only function and 150,000-event capacity make the unit relevant to employee entry records. Confirm report generation and software licensing for your HR workflow. Its IP65-rated enclosure and −30°C to 60°C operating range support demanding locations, provided power connections and cabling are installed appropriately.
| Model | Hikvision DS-K1T673DX-E1 |
|---|---|
| Screen | 7-inch IPS capacitive touch; 600 × 1024 |
| Imaging | Dual-lens, 2MP wide-angle camera |
| Face / card capacity | 10,000 faces / 50,000 cards |
| Fingerprint capacity | 10,000 with compatible fingerprint module |
| Card formats | M1, DESFire and FeliCa |
| Event storage | 150,000 events |
| Face distance / duration | 0.3–3m / less than 0.2 second per person |
| Network / interfaces | Gigabit Ethernet, RS-485, Wiegand, USB for module |
| Power | IEEE 802.3at PoE or 12–24V DC, 2A |
| Protection / size | IP65; 110.5 × 209.2 × 24mm |
| Model | Face capacity | Key buying difference |
|---|---|---|
| DS-K1T673DX-E1 | 10,000 | Three card formats and PoE; fingerprint requires a module. |
| DS-K1T670MFWX | 6,000 | Built-in fingerprint and 2.4GHz Wi-Fi with M1 cards. |
| DS-K1T671MF | 6,000 | QR code workflows and wired networking. |
Choose by credential format, available network, enrollment size and required peripherals. You can explore other Hikvision products or plan the door alongside a broader security system.
Confirm the electric lock, exit switch, card type, PoE switch or DC supply, mounting position and fingerprint module. Ask for a software demonstration if attendance reports matter. Protect exterior cable openings; IP65 describes the enclosure, not unsealed wiring.
Hikvision specifies up to 10,000 faces, alongside 50,000 card entries and 150,000 events.
No. Fingerprint verification and its 10,000-template capacity require a compatible fingerprint module.
It supports M1, DESFire and FeliCa cards. Confirm your existing badge format before purchase.
Yes. The published standard is IEEE 802.3at PoE; it also has a 12–24V DC input.
Hikvision’s specification lists a wired Gigabit Ethernet interface and does not list built-in Wi-Fi.
Yes. It includes one lock output plus exit-button, door-contact, alarm and tamper interfaces.
The enclosure is IP65-rated. Confirm mounting and weather protection for cables and power connections.
Touch IT Solutions provides genuine Hikvision biometric time attendance, access control, CCTV surveillance, and security system products in Bangladesh with competitive pricing, expert consultation, professional installation support, nationwide delivery, and dependable after-sales service.
Upgrade your workplace security with the Hikvision DS-K1T673DX-E1 Access Control Terminal. Order from Touch IT for the latest price, stock confirmation, installation support, and project consultation. Visit Touch IT Solutions at ECS Computer City Center, Multiplan Center, New Elephant Road, Dhaka-1205, or call 01711664030.
The latest price of Hikvision DS-K1T673DX-E1 Access Control Terminal in Bangladesh is 0৳. You can buy the Hikvision DS-K1T673DX-E1 Access Control Terminal at best price from our website or visit any of our showrooms.